Sorama CAM iV64Ex
Ex‑certified acoustic camera for safe inspections in hazardous environments
What is the
Sorama CAM iV64Ex?
Inspect in real-time
Inspect your assets during normal operations, no shutdowns required.
Safe distance
Ultrasonic far‑field detection lets you inspect from outside the immediate risk zone.
For harsh conditions
Ex‑certified design with IP54 protection for challenging industrial conditions.
Flexible export
Transfer your results via Wi‑Fi, USB‑C, or the Sorama Portal.
/Vertical/SI_hydrogen-enagas.jpeg "SI_hydrogen-enagas")
How does the Sorama CAM iV64Ex work?
During inspection, the CAM iV64Ex listens for high‑frequency acoustic patterns produced by leaks, partial discharge, or mechanical irregularities.
As the operator scans the area, the device converts the captured sound into a live acoustic image on the screen, making it easier to pinpoint the source quickly and safely. After the inspection, results can be saved and shared to support documentation, follow‑up, or maintenance planning.
Where is it used?
For on‑site teams in ATEX and IECEx zones who need safe inspections for gas leaks, partial discharge, and mechanical faults during normal operation.
/1920%20x%201080%20(best%20quality%20and%20size)/SI_Complex-industrial-site.jpg?width=1920&height=1080&name=SI_Complex-industrial-site.jpg)
Hazardous environments
For hazardous and regulated sites where safety, certification, and uptime are critical, including oil and gas, chemical processing, hydrogen, energy, and utility infrastructure.
/Vertical/SI%20rotating-equipment.jpeg?width=768&height=736&name=SI%20rotating-equipment.jpeg "SI rotating-equipment")
Limitations
The Sorama CAM iV64Ex provides real‑time visualization for on‑site inspections in hazardous zones.
The Sorama CAM iV64Ex is not:
-
A remote device, it must be manually aimed at the targeted area.
-
A gas concentration meter or chemical identification tool.
-
An electrical test equipment used to confirm insulation integrity.
Frequently Asked Questions
Can the Sorama CAM iV64Ex be used in hazardous areas?
Yes. The Sorama CAM iV64Ex is DEKRA certified for ATEX and IECEx environments. This allows technicians to perform inspections in hazardous zones while following site safety procedures.
What types of issues can the Sorama CAM iV64Ex detect?
The Sorama CAM iV64Ex helps locate pressurized gas leaks, partial discharge from electrical systems, and mechanical anomalies such as friction or bearing issues.
Can inspections be performed while equipment is running?
Yes. The Sorama CAM iV64Ex detects acoustic emissions during normal operation. This allows technicians to inspect systems without shutting down production.
How far away can the Sorama CAM iV64Ex detect sound sources?
Detection range depends on the sound source and environment. In practice, inspections usually happen from several meters away, with an operating range between about 0.3 m and 120 m.
How are inspection results stored and shared?
Results can be stored on the device and exported through Wi-Fi or USB-C. Measurements and reports can also be transferred to Sorama Portal for analysis, documentation, and sharing with teams.